Smok Alien Kit Alien 2W Box Mod with 3ml TFV8 Baby Tank Electronic Cigarette Vape Kit VS Smok ULTRA
Please order it ,we will send free gift to you!
* 2W high wattage
* VW/TC function
* Firmware upgradeable
* 3ml mini size
* Re-designed bottom pair air-slots, air chamber and drip tip
* Adjustable airflow system
* Top refill system
Mod Size: 85 x 44 x 28.4mm
Power Range: 1W-2W
Resistance Range: 0.1Ω-3Ω (VW) / 0.06Ω-2Ω (TC)
Temperature Range: 0F–600F/100C–315C
Material: Stainless Steel
Tank Size: 22 x 53mm
E-juice Capacity: 3ml
Battery Type: two 18650 battery (not include)
1 * Alien 2 Mod ( not include 18650 battery, if you need, please )
1 * TFV8 Baby Tank
1 * V8 Baby-Q2 Core (0.4Ω dual coils) (Pre-installed)
1 * V8 Baby-T8 Core (0.15Ω octuple coils)
1 * USB Cable for Charging/Upgrading
1 * Replacement Glass Tube
1 * User Manual
Note: If you want the Separately mod without tank, pls kindly
ADJUSTABLE AIRFLOW SYSTEM
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.
THE KIT INCLUDES
HOW TO BUILD THE RBA
1. Before starting, make sure your hands are clean.
2. Take RBA deck apart.
3. Install and position the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all is in place, make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cut the excess ends of the wire off.
5. Cut a strip of cotton and make sure it’s not too much and not too little.
6. Insert the cotton and placing it in the middle of the coil.
7. Cut the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
UPGRADE YOUR ALIEN MOD
Recommend accessories for the product
About the Packing:
1.To avoid the products was damage during the long time transportation, each package we have use one more Bubble film to protect it. 2. To avoid the customs problems and import tax, we have show others products name and lower price on the package. Below is our packing details.
|Dimensions||10 x 8 x 6 cm|
|Compatible Model||Smok Alien Kit|
|Model Number||Smok Alien Kit|
|Mod Size||85 x 44 x 28.4mm|
|Temperature Range||200–600/ 100–315|